Semi Downdraft Paint Booths

 [Home] [Crossdraft] [Semi Downdraft] [Side Downdraft] [Air Make-Up]

PRICED AT $  7,200

Heat and Cure Cycle Booth $ 15,600

                                                                          Built Solid for Easy Assembly and Long Life No Hidden Charges No Crating Charge

• Standard 6" Structural " I " Beam Support for Solid Booth & Easy Assembly

• Standard Bridge Style Exhaust Chamber - Optimum Air Flow - Structural Support

• Nut and Bolt Construction for Sure Fit and Sure Alignment

• Horizontal Side Wall Lighting for More Even Light and No Shadows

Meets N.F.P.A. 33 , O.S.H.A. , and BOCA Guidelines

The Semi Downdraft booth intakes fresh air from the cleaner upper levels of the shop, through a bank of filters in the ceiling near the product doors. The filtered air is drawn down across the length of the booth, through a filtered exhaust system at the back. These spray booths are available in solid back, drive through, and reverse flow designs.

Inside Dimensions: 24' Work Depth x 14' Wide x 9' Tall

FEATURES

• Standard 6" Structural " I " Beam Support - Air Tight 18 Gauge Galvanized Steel Construction
• 10-48" 4 Tube Fluorescent Light Fixtures with Clear Tempered Glass
• 30" Tube-Axial Fan with 3-Phase - 3 hp Motor – 12,600 CFM
• 9' High x 10' Wide Entrance Doors
• Personnel Door with Window
• Draft Gauge
• Standard Bridge Style Exhaust Chamber - Optimum Air Flow - Structural Support
• All Hardware, Fasteners, Sealants
• Assembles in 2-3 days
• Any and All Options Available on Request

Heated Air Replacement / Air Make Up Units  

• Rupp 12,000 CFM Direct Fired Gas Heated Air Make-up Unit (V-12) to replace the exhaust air from the paint spray booth.  Air Make-up Unit features 100% fuel efficiency.

• V12 Vertical Unit Arrangement with Side Discharge – Includes Vertical Mounting Stand

• 100% Replacement Air

• 12,000 SCFM / 0.5 Duct SP

• Electric Current:  208-230-460/60/3 3-wire

• ETL Label

• Outdoor Safety Switch (Disconnect) and Motor Starters

• Unit Location: Outdoor Installation

• 10 HP Motor - ODP - High Efficiency EPACT

• 1,620 BTUH (in 1000’s) / 125° Temperature Rise (deg F)

• Gas Pressure:  7 to 14” (Natural Gas)

• Gas Manifold:  ANSI w/2 Solenoid Gas Valves

• Temperature Control System:  401M - Maxitrol

• “M Series” Programmable Temperature Controller

• G-90 Galvanized Casing - Unpainted Casing

• Intake Screen

• Flame Failure Light & High Temp Limit

• Burner On/Off Intake Air Duct-stat

• Remote Control Panel with Operating Lights and Variable Frequency Drive

Please contact us, we look forward to working with you .

Toll Free - 866-342-9200

mail@automotivepaintbooths.com

Web Site Developed by TCO Web Development